Big appliances and machines need the right wiring, breakers, and protection to run safely. We install dedicated circuits and connect high-load equipment across Gweru for homes, shops, and light industry. Clean work, clear labels, and practical advice for local grid conditions.
From ovens and geysers to welders, compressors, and borehole pumps, we size cables and breakers correctly and add isolation where you can reach it. That means fewer trips, less heat on cables, and longer equipment life.
We also set up safe points for inverters and generators so backup power isn’t overloaded. If something must stay grid-only, we mark it clearly and keep your essential loads on the right supply.
If an appliance keeps tripping or the plug runs hot, we test the circuit, measure current draw, and check earthing and leakage. Often a dedicated line or corrected wiring solves the problem without replacing the appliance.
We serve CBD, Ivene, Northlea, Windsor Park, Nehosho, and nearby areas. Expect neat trunking, proper terminations, and a simple handover so anyone can operate the gear confidently.
FAQs
Which appliances need a dedicated circuit?
Ovens, geysers, heat pumps, borehole pumps, air-cons, large fridges/freezers, welders, and compressors usually need their own correctly sized circuit and isolator. We confirm the load (amps/kW) and install the right cable and breaker.
My appliance trips the breaker — is the appliance faulty or the wiring?
Could be either. We test the appliance current and insulation, then check cable size, breaker curve, and earth leakage. If the circuit is undersized or shared with other loads, we install a dedicated line and fix the nuisance trips.
Can you add a socket for a welder or heavy machine in my workshop?
Yes. We install industrial sockets with the correct rating, breaker, and RCD/RCBO where appropriate. We also consider start-up surges and advise on safe lengths and routes to avoid voltage drop.
How do you handle appliances with inverters or generators?
We separate backup and grid-only circuits at the DB so heavy loads don’t collapse your inverter or overload the generator. Changeover/ATS wiring, earthing, and labelling make the sources clear and safe.
Do you install isolators and emergency stops?
We do. Visible, reachable isolators for ovens, pumps, and machinery make maintenance safer and help during faults. For some machines, we can add mushroom-type emergency stops as needed.
Can you help with a new kitchen or shop fit-out?
Absolutely. We plan positions, load groups, and cable routes for ovens, microwaves, fridges, coffee machines, POS, and signage. Everything is labelled so staff can reset safely after load-shedding.